中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
JC/T 2708-2022 真空玻璃传热系数检测方法(中英文版) Testing method for heat transfer coefficient of vacuum glass |
|||
GB/T 15717-2021 真空金属镀层厚度测试方法 电阻法(中英文版) Test method for vacuum-deposited metal thickness—Electric resistance method |
|||
GB/T 4214.2-2020 家用和类似用途电器噪声测试方法 真空吸尘器的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for vacuum cleaners |
|||
GB/T 17475-2020 重烃类混合物蒸馏试验 真空釜式蒸馏法(中英文版) Standard test method for distillation of heavy hydrocarbon mixtures—Vacuum potstill method |
|||
YY/T 0681.18-2020 无菌医疗器械包装试验方法 第18部分:用真空衰减法无损检验包装泄漏(中英文版) Test methods for packaging of sterile medical devices - Part 18: Non-destructive testing of packaging for leaks by the vacuum decay method |
|||
GB/T 4060-2018 硅多晶真空区熔基硼检验方法(中英文版) Test method for boron content in polycrystalline silicon by vacuum zone-melting method |
|||
GB/T 34522-2017 航天器热真空试验方法(中英文版) Thermal vacuum test method for spacecraft |
|||
GB/T 34338-2017 真空玻璃用熔封玻璃力学性能试验方法(中英文版) Test methods for determining mechanical properties of sealing glass for vacuum glazing |
|||
QC/T 307-2016 汽车用真空助力器性能要求及台架试验方法(中英文版) (Automobile vacuum booster performance requirements and test methods of) |
|||
QC/T 1028-2016 汽车真空单向阀性能要求及试验方法(中英文版) Performance requirements and test methods of vehicle vacuum check valve |
|||
GB/T 32218-2015 真空技术 真空系统漏率测试方法(中英文版) Vacuum technology—Test methods for leak rates of vacuum system |
|||
GB/T 32293-2015 真空技术 真空设备的检漏方法选择(中英文版) Vacuum technology—Selection of leak test methods for vacuum equipment |
|||
GB/T 32062-2015 真空玻璃真空度衰减率现场检测方法 光弹法(中英文版) In-situ test method for degradation ratio of vacuum degree of vacuum glazing—Photoelastic method |
|||
QC/T 1004-2015 汽车电动真空泵性能要求及台架试验方法(中英文版) Preformance requirements and bench test methods of automobile electric vacuum pump |
|||
DL/T 1290-2013 直接空冷机组真空严密性试验方法(中英文版) Test method on vacuum tightness of direct air-cooled generating unit |
|||
QC/T 958-2013 汽车真空泵性能要求及台架试验方法(中英文版) Performance requirements and bench test methods of automobile vacuum pump |
|||
GB/T 28786-2012 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法(中英文版) Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test |
|||
YY/T 0698.1-2011 最终灭菌医疗器械包装材料 第1部分:吸塑包装共挤塑料膜 要求和试验方法(中英文版) Packaging materials for terminal sterilized medical devices. Part 1: Co-extrusion plastic films used for vacuum forming packaging. Requirements and test methods |
|||
GB/T 18443.8-2010 真空绝热深冷设备性能试验方法 第8部分:容积测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 8: Volume measurement |
|||
GB/T 13929-2010 水环真空泵和水环压缩机 试验方法(中英文版) Methods of testing for water-ring vacuum pumps and compressors |
找到:40條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |